Spray Foam Insulation Abilene, TXAt Abilene Spray Foam Insulation, we offer homeowners as well as commercial business owners high-quality spray foam insulation services in Abilene, TX. Spray foam insulation is becoming a popular choice today because of its high performance and efficiency.
Before opting for spray foam insulation, it is important to know what it is, the different types of spray foam insulation, what is R-value and know about areas that spray foam insulation should not be used. |
|
What is Spray Foam Insulation?
Spray foam insulation is also known as spray polyurethane foam and is made up of two primary components, polyol resin and isocyanate. The two components are combined only at the jobsite and they react with one another to form spray foam. Abilene Spray Foam Insulation is an alternative to traditional types of insulation like cellulose and fiberglass.
Spray foam insulation has several benefits over traditional types of insulation. For instance, it can be sprayed on almost any substrate and it will fill all gaps and crevices thus acting as an insulating material as well as an air-barrier. Spray foam insulation in Abilene TX comes in two types, open-cell and closed-cell.
Spray foam insulation has several benefits over traditional types of insulation. For instance, it can be sprayed on almost any substrate and it will fill all gaps and crevices thus acting as an insulating material as well as an air-barrier. Spray foam insulation in Abilene TX comes in two types, open-cell and closed-cell.
R-value of Spray Foam Insulation
R-value refers to the ability of an insulating material to resist heat. It is a measure of how well the insulating material prevents the escape of heat during the winter and entry of heat during the summer. The higher the R-value of a material, the better is its insulating capacity. Spray foam insulation has a comparatively higher R-value than other traditional types of insulation. It ranges between R-3.8 to R-7. The great thing about spray foam insulation is that it does not lose its R-value over time like cellulose or fiberglass. Because of its superior R-value per inch, it is easy to use spray foam insulation and it helps you to achieve the desired R-value in a tiny space like in a wall cavity.
Difference between Open-Cell and Closed-Cell Spray Foam Insulation
Open-cell spray foam insulationIn open-cell spray foam insulation, the cells are not fully encapsulated. The cells are left open deliberately. Open-cell spray foam insulation is flexible and soft. When sprayed, open-cell insulation is capable of expanding up to 100 times its volume.
Some of the properties of open-cell spray foam insulation are as follows:
|
Closed-cell spray foam insulationAs the term suggests, in closed-cell spray foam insulation the cells are completely closed. This makes it impermeable to moisture and water. It is rigid and stable and is commonly used in open cavities or commercial buildings and pole barns.
The properties of closed-cell spray foam insulation are as follows:
|
Cost of Spray Foam Insulation in Abilene TX
The average cost of spray foam insulation in Abilene TX can cost anywhere between $1500 and $3000. But there are several factors that this depends upon. For instance, you need to consider the hourly rate; the total recommended R-value, whether you will use open-cell spray foam or closed-cell spray foam insulation, and the total cost of labor. Some of the other expenses may include a home inspection, permits that may be required, and tax and fees for a general contractor if needed.
If you opt for open-cell spray foam insulation in Abilene TX it will cost between $0.44 and $0.65 per board foot and closed-cell spray foam insulation will cost between $1 and $1.5 per board foot for the raw-material itself. One-foot board is 12 inches in length, 12 inches in width and 1 inch in thickness. To get an idea about how much you will pay for spray foam insulation in Abilene TX, if you have an average 2,200 square foot home, you are looking to pay around $1,200 to $1,500 for open-cell spray foam insulation that has a minimum of 1.5” to 3.5” thickness. Closed-cell spray foam on the other hand, will cost you a minimum of $6,500 for 1.5” thickness and it can go up to $10,500 for 3.5” in thickness |
Benefits of Spray Foam Insulation in Abilene, TX
Spray foam insulation has many advantages compared to other types of insulation. Some of the most important ones are listed below:
|
|
|
|
Where Should Spray Foam Insulation Be Avoided?
Spray foam insulation in Abilene TX can be used almost anywhere but there are certain places that it should be avoided in order to prevent hazards. Listed below are some places that you should not use spray foam insulation:
|
|
Why You Should Hire a Professional
Though there are plenty of spray insulation kits available today, installing spray foam insulation in Abilene TX is not as easy as it looks. The two components commonly referred to as A and B needs to be mixed at the right temperature and a good consistency needs to be obtained in order to spray it.
There is always the chance of the foam getting spoilt in the can itself and in this case, you will have to dispose of the entire product. While spraying the foam, care needs to be taken not to over-spray the product. Too much spray foam sprayed at once can lead to too much heat, improper drying of the product and a permanent odor. Installation of spray foam insulation in Abilene TX also requires the use of protective gear. All professional spray foam insulation contractors wear protective clothing and gear to protect themselves from the harmful fumes that are given out while using the product. Spray foam insulation is completely safe only after it completely cures. Though it may seem like you would be saving a lot of money by doing the job yourself, hiring a professional will save you time, energy and the hassle of fixing an improper spray foam job, especially if this is your first time attempting to use spray foam insulation in Abilene TX. A professional will also properly dispose of the extra waste materials and any prior insulation that you are replacing. |
Contact Us
If you need the installation of spray foam insulation in Abilene, TX, feel free to contact us. We will be happy to assist you with any concerns or questions regarding spray foam insulation. We can also offer a free assessment and estimate if required.